#INDIAN TOMAHAWK HOW TO#
#INDIAN TOMAHAWK FREE#

To bind the handle to your stone head, use a leather cord or rawhide. Cut it to the size that you want, cut a notch in the wood that will hold the stone, whittle off the bark, and smooth the surface of the handle with sandstone to prevent splintering. If you want to make your own handle, choose a sturdy branch that is thick but that still fits comfortably in your hand. Fastening the handleĪfter you are finished with the tomahawk head, you will need to fasten it to a handle. Once you are finished sharpening the blade, rub the entire edge with a smooth sandstone while holding it at a 20-degree angle. You should anticipate the grinding process to take a long time. Grind by pushing the sandstone across the blade’s edge away from your body. This could be a granite or sandstone rock. Use a rock that has an abrasive surface to grind the blade’s edge. Sharpening the edge of the bladeĪfter you have pounded the stone into the shape of an tomahawk head, you will want to sharpen the blade’s edge. The groove should extend about halfway around the top of the head to its bottom. Carefully pound in a groove around three-quarters back from the blade area. You will next want to form a groove that will be used to tie the tomahawk head to your handle. Make sure not to pound so hard that you break the stone that you are shaping. With your other hand, use the second rock to pound on the blank until it is approximately the shape of a tomahawk head. Place the blank on the log or board and hold it in place.

Finally, you will also need a log or other strong board to use as a work surface while you shape your tomahawk head. The harder rock is what you will use to shape the blank rock. Pick a rock that has a smooth surface and that feels heavy for its size.Īfter you have found the rock that you will shape into the head, find another rock that is harder than the rock that you will shape.

#INDIAN TOMAHAWK FREE#

The rock should be hard, free from cracks, and finely grained. It is best to look for a stone that has a similar shape to what the end product will look like to aid in the shaping process. Choose a large enough rock to allow for errors during the shaping process. To make a stone tomahawk, you will need a “blank.” While you can choose almost any type of rock, the time it will take to shape it will depend on its composition and its shape.

#INDIAN TOMAHAWK HOW TO#

By following these steps, you can learn how to make a Native American stone tomahawk. Several techniques were used by Native Americans to make these tomahawks. They made these tomahawks for centuries and used them as all-purpose tools for building, hunting, and protecting their homes and families. In the past, Native Americans were able to build impressive structures by using stone tomahawks.

Indian tomahawk